Download the 2d outline drawing (mouse outline.dxf).Please wait while your request is being verified…

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Report DMCA. Home current Explore. Words: 8, Pages: Then reopen again. You can see the workbench icon at the upper right-hand corner. These will be a good reference for us to build the 3D in the middle of the screen. You can click any standard view icon to change viewing direction so that you can compare your working 3D with the reference at a specific viewpoint. We treat them as the background images only. First we see the side view is upside down.

First we see the side view is orientated correctly. Draw an Arc R90mm , with two ends symmetric about the x-axis and the arc is touching the y-axis;. Draw an Arc Rmm , with two ends symmetric about the y-axis and the peak 11mm from the x-axis;.

Click OK to activate the draft analysis so that we can always get the draft distribution updated after every. Email : [email protected]. Match case Limit results 1 per page. Author: juhasz-istvan Post on Dec 34 views. Category: Documents 5 download.

Tags: catia surfacemodelingtutorial f oct07a drawing check d outline drawing downloaded drawing mouse problem surface hybrid design imported drawing build. Then reopen again. You can see the workbench icon at the upper right-hand corner. Now Sketch. Now the top view is relocated at the origin ; Click Exit to complete.

Similarly, we can modify Side View First we see the side view is upside down. Now we can see a portion of the sketch exceeds the y- axis, so we need to fine-tune it ; Select all elements of the shape and click Translate icon again; Click the origin Enter 2.

Double-click Front View sketch on the tree to edit; Select and delete the curves not related to the front view; Top View Side ViewFront View CATIA V5R16 surface modeling Mouse Written by Dickson ShamNon commercial useVersion 1f- Oct07A- 13 Tutorial 2A Create a point at the middle of the lowest line Click point icon, put the mouse cursor onto the lowest straight line, click to confirm its position when the auto-detect symbol is a solid blue circle ; Select all elements of the shape and click Translate icon Leave Duplicate mode unchecked; Click the point that we just created; Then Click the origin of the sketch.

These will be a good reference for us to build the 3D in the middle of the screen. You can click any standard view icon to change viewing direction so that you can compare your working 3D with the reference at a specific viewpoint. Right-click Geometrical Set. The reason why we choose the views are unpickable is that we dont want to use any curves from them or have any relations with them.

Please be reminded that this series of tutorials is designed to demonstrate a design. This tutorial is an introduction to Part Design. Catia v5 tutorial pdf surface. Could really use some help to learn advanced surfacing techniques. I would like to learn more modules from Catia for example DMU Kinematics, Structural analysis, Sheet metal design and other but I can\’t find a good tutorial or. Visit the following websites to learn more about this book: Page 3.

Is not the intent of this book to be a comprehensive reference manual but provide basic instructions for the most common tools and functions in CATIA V5. Catia v5 tutorial pdf free download. Welcome any comments you may have regarding this training manual, or any. Catia v5 tutorial pdf for beginners. Design, the following tutorial provides a step-by-step scenario demonstrating how.

Design precise 3D mechanical parts with an intuitive and. Select Sketch. Select the edge on the surface; Then other portions along the edge will be selected automatically.

To create two straight lines:- Click Line icon; Select the endpoint of Sketch. Click Line icon again; Select the endpoint of Sketch. Then we are going to modify its curvature such that it is in the similar shape as the reference imported drawing. Click Symmetry icon; Select Sketch. Similarly, Click Symmetry icon again; Select Connect. Select Boundary. One of the common strategies is to increase the distance between two sections so that there is more room to transform one section into the other one, thus decreasing the shrink marks on the resultant surface.

After modifying the position of the front section, the back surface is updated but the tree is not in logical sequence.

Although it is not a must and does not affect the final result, keeping the tree in a correct order can help us modify the model more easily in future.

Right-Click Geometrical Set. Tutorial 2BTo create a swept surface:- Click sweep icon; Select Circle as Profile type; Select Two guides and radius as subtype; Click the two edges of the hole as guide curve.

Enter 80mm as radius; Click preview icon; Click Next icon until the solution is the inner. Click OK to activate the draft analysis so that we can always get the draft distribution updated after every modification on the surface. To modify the curvature of the problem surface:- Right-click on Line. Tutorial 2BBe sure that the W-axis of the compass should be pointing upwards and the red-dot should be at the endpoint of Line. Tutorial 2B Delete Draft Analysis.

It will return to its original stage. If not,. To create a bottom surface:- Click Sketch icon Select yz plane Draw a straight line on x-axis, which is. To join surfaces:- Click Join icon Select Join. To create an extruded surface:- Click Extrude icon; Select the curveExtract. To create an offset surface:- Click Offset icon Select Extrude. To create an extruded surface:- Click Extrude icon Select the line Line. To show previous element:- Click Swap visible space icon Select Sketch. Hide all elements exceptXy planeYx planeZx planeTrim.

Design; Click close surface icon; Click ok on the warning message; Select Trim.

 
 

3axis.co have 51 2d dxf and vector files (.cdr, .eps) for free to download..Download the 2d outline drawing (mouse outline.dxf)

 

Author: jaiselva. Category: Documents. Embed Size px x x x x Please be reminded that this series of tutorials is designed to demonstrate a designapproach with CATIA, rather than the command itself.

By default, an empty Product file is created. Check if the displayed dimension is 50mm; Ifnot, we need to enlarge or shrink the drawinginto the correct size. Check if the current workbench has beenGenerative Shape Design. You can see theworkbench icon at the upper right-hand. Create a point at the rightmost of the shape Click point icon, put the mouse cursoronto the rightmost arc, click to confirm itsposition when it is aligned on the same levelas the center of the inner arc ;.

First we see the side view is upside down. Then Click the origin of the sketch. Now wecan see a portion of the sketch exceeds the y-axis, so we need to fine-tune it ;. First we see the side view is orientatedcorrectly.

Tutorial 2A Now we have positioned the three views at thecorrect places. These will be a good reference. The reason why we choose the views areunpickable is that we dont want to use anycurves from them or have any relations withthem. We treat them as the background. Draw an Arc R90mm , with two ends symmetricabout the x-axis and the arc is tangent to the y-axis;. Reminded that two arcs must be tangentto each other; one end of the small arc istouching the x-axis; one end of the bigger.

Select the edge on the surface; Then other portions along the edgewill be selected automatically. Then we are going to modify its curvaturesuch that it is in the similar shape as thereference imported drawing.

Select Boundary. One of the common strategies is to increasethe distance between two sections so thatthere is more room to transform one sectioninto the other one, thus decreasing the shrinkmarks on the resultant surface. After modifying the position of the front section,the back surface is updated but the tree is not inlogical sequence. Although it is not a must and. Click OK to activate the draft analysis so that we canalways get the draft distribution updated after everymodification on the surface.

Be sure that the W-axis of the compass should bepointing upwards and the red-dot should be at theendpoint of Line. It will return to its originalstage. Now a new set is created. It isunderlined, and so all the comingelements will be stored under this set. As the parts are created from the samemaster model at the same origin, theyare located at the right places wheninserted into a product.

Drag the red dot of the compass onto the globalcoordinate system at the lower righthand cornerof the screen and then release;. Match case Limit results 1 per page. Author: jaiselva Post on Oct views. Category: Documents 14 download. Then reopen again. You can see theworkbench icon at the upper right-hand corner. Now Sketch. Now thetop view is relocated at the origin ; Click Exit to complete. Similarly, we can modify Side View First we see the side view is upside down.

Now wecan see a portion of the sketch exceeds the y-axis, so we need to fine-tune it ; Select all elements of the shape and clickTranslate icon again; Click the origin Enter 2. These will be a good reference for us to build the 3D in the middle of thescreen. You can click any standard view icon to change viewing direction so that you cancompare your working 3D with the reference ata specific viewpoint. Right-click Geometrical Set. We treat them as the background images only. Click an open area to deselect the Sketch Sketch.

Then Hide Plane. Click Sketch icon and selectthe new plane Plane. Click ok to complete The arc touchesTranslate.

To create a plane at that maximum point:- Click Plane icon; Select yz plane and then Extremum. Make a point atthe peak Sketch. Add a coincidenceconstraint between the arc andextremum.

Click ok to complete Fillet. Click ok to complete Hide Sketch. Similarly, Click Symmetry icon again; Select Connect. Remark: A combined curve Boundary. If not, change either one. Click under Guides in the menu; Select Sketch. Click Split icon; Select the front surface Edge Fillet. Remark: The back surface Multi-sections surface. As you see, the back surface becomes smoother than before. Although it is not a must and does not affect the final result, keeping the tree ina correct order can help us modify the modelmore easily in future.

Multi-sections surface. Enter 80mm as radius; Click preview icon; Click Next icon until the solution is the innersmaller arc; Click ok to complete. We find a portion with Zero Draft Red along theparting line. To modify the curvature of the problem surface:- Right-click on Line. The line will be orange and thecompass will be green.

Right-click the red-dot of the compass and selectEdit; Enter 10deg as Rotation Increment; Click positive rotation along W icon; Click Close Now the portion with zero-draft disappears after weve modified the curvature of the problem surface. It will return to its originalstage Now, the upper skin has been completed. Hide all elements except Join. If not, click it once Click ok to complete.

Zx plane Sweep. If not,click it once Click ok to complete To create a bottom surface:- Click Sketch icon Select yz plane Draw a straight line on x-axis, which is long enough to go across the wholemodel Click Exit icon to exit Fillet. To join surfaces:- Click Join icon Select Join.

Now, we are going to create parting surfaces, transform theskin surface into a solid, and then split it into separatecomponents. Hide Extrude. Similarly Click Trim icon; Select Trim.

Hide all elements except Xy plane Yx plane Zx plane Trim. Now we are going to assemble the parts into aproduct with other components, e. CATpart Click Open As the parts are created from the samemaster model at the same origin, theyare located at the right places wheninserted into a product. Surface Machining – cadcamlab. Airbus – Machined Part Modelling for Catia v5. Wireframe and Surface Catia tutorial. Surface Machining – Engineeringfile1. Student Notes: Surface Modification Toolsyvonet.

Catia Surface. Student Notes: Additional Exercisesyvonet. Airbus Catia V5 Wireframe and Surface. Catia V5 R Wireframe n Surface. Ability to easily modify models, and implement. Modelling protein Modelling protein-surface interactions: a surface.

 

Download the 2d outline drawing (mouse outline.dxf).

 

Author: neagoie-sergiu. Category: Documents. Embed Size px x x x x Please be reminded that this series of tutorials is designed to demonstrate a design approach with CATIA, rather than the command itself. If the license menu pops up, select ED2 and close.

Tutorial 2ATo confirm that the size of the drawing is correct:- Click Dimensions icon; Click on the scale line of the drawing; Check if the (mosue dimension is 50mm; If. Check if the current workbench has been Generative Shape Design. You can see the workbench icon at the upper right-hand corner. If you cannot find the icon, reset the toolbar layout.

Click Plane icon; Select offset from plane as type; Pick xy plane as reference; Enter mm as Offset value; Click ok to confirm. Create a point at the rightmost of the shape Click point icon, put the mouse cursor onto the rightmost arc, click to confirm its position when it is aligned on the same level as the center of the inner arc.

Tutorial 2A Leave Duplicate mode unchecked; Click the point that we just created; Then Click the origin of the sketch. Now the. First we see the side view is orientated correctly. Click point icon, put the mouse cursor onto the lowest straight line, oytline.dxf) to confirm its position when the auto-detect symbol is a solid blue circle. Leave Duplicate mode unchecked; Click the point that читать больше just created; Then Click download the 2d outline drawing (mouse outline.dxf) origin of the sketch.

These will be a good reference for us outkine build the 3D in the middle of the screen. You can click any standard view icon to change viewing direction so that you can compare your working 3D with the reference at a specific viewpoint.

The download the 2d outline drawing (mouse outline.dxf) why download the 2d outline drawing (mouse outline.dxf) choose the views are unpickable is that we dont want to use any curves from them or have any relations with them. We treat them as the background images only. Click Symmetry icon; Select Sweep. Click Shape Fillet icon; Select surfaces Sweep. Click Translate icon; Select Combine. To create a sketch mating with an external 3D curve:- Click Sketch icon; Select zx plane; Draw two arcs as вот ссылка Reminded that two arcs must be tangent.

To create a plane at that maximum point:- Click Plane icon; Select yz plane and then Extremum. Select Sketch. Select the edge on the surface; Then other portions along the edge will be selected automatically. To create two straight lines:- Click Line icon; Select the endpoint of Sketch. Click Line icon again; Select the endpoint of Sketch. Then we are going to modify its curvature such that it is in the similar shape as the reference imported drawing.

Click Symmetry icon; Select Sketch. Similarly, Click Symmetry icon again; Select Connect. Select Boundary. One of the common strategies is to increase the distance between two sections so that there is more room to transform one section into the other one, thus decreasing the shrink marks outlinf.dxf) the resultant surface. After modifying the position of the front section, the back surface is updated but the tree is адрес страницы in logical sequence.

Although it is not a outlins and does not affect the final result, keeping the tree in a correct order can help us modify the model more easily in future. (mouee Geometrical Set. Tutorial 2BTo create download the 2d outline drawing (mouse outline.dxf) swept surface:- Click sweep icon; Drqwing Circle as Profile type; Select Two guides and radius as subtype; Click the two edges of the hole as guide curve.

Enter 80mm as radius; Click preview icon; Click Next icon until the solution is the inner. Click OK to activate the draft analysis so that we can always get the draft distribution updated after every modification on the surface.

To modify the download the 2d outline drawing (mouse outline.dxf) of the problem surface:- Right-click on Line. Tutorial 2BBe sure that the W-axis of the compass should be pointing upwards and the red-dot should be at the endpoint of Line.

Tutorial 2B Delete Draft Analysis. It will return to its original stage. If not. To create a bottom outlihe.dxf) Click Sketch icon Select yz plane Draw a straight line http://replace.me/28497.txt x-axis, which is.

To join surfaces:- Click Join icon Select Join. To create an extruded surface:- Click Extrude icon; Select the curveExtract. To create an offset surface:- Click Offset icon Select Extrude. To create an extruded surface:- Click Extrude icon Select the line Line. To show previous element:- Click Swap visible space icon Select Sketch. Hide all elements exceptXy planeYx planeZx planeTrim. Design; Click close surface icon; Click ok on the warning message; Select Trim.

To hollow the solid:- Click Shell icon; Enter 2. Click Shell icon Enter 1. Tutorial 2C Right-click Body. Design Click Offset icon Select Surface. Now we are going to assemble the parts into a product with other components, e. Drag the red dot of the compass onto the global coordinate system at the lower righthand corner of the screen and then release.

Ambient 0. Master Model. If we make any change on it, the linked parts will be updated automatically. Show Geometrical Set. Siphon 3 download for Documents Catia Mouse 1. Match case Limit download the 2d outline drawing (mouse outline.dxf) 1 outlin page.

Author: neagoie-sergiu Post on Nov 64 views. Category: Documents 8 download. Tags: b sep06 drawing check dickson sham downloaded drawing mouse d outline drawing imported drawing build problem surface close catia. Then reopen again. By default, an empty Product file is created. Now Sketch. Now the top view is relocated at the origin ; Click Exit to complete.

Similarly, we can modify Side View First we see the side view is upside down. Now we can see a portion of the sketch exceeds the y-axis, so we need to fine-tune it ; Select all elements of the shape and click Translate icon again; Click the origin Enter 2. Right-click Geometrical Set. Click an open area to deselect the Sketch Sketch.

Then Hide Plane. Click Sketch icon and select the new plane Plane. Click ok to complete The arc touches Translate. Make a point at the peak Sketch. Add a coincidence constraint between the download the 2d outline drawing (mouse outline.dxf) and extremum. Click ok to complete Fillet.

Click ok to complete Vrawing Sketch. Remark: A combined curve Boundary. If not, change either one. Click under Guides in the menu; Select Sketch. Click Split icon; Select the front surface Edge Fillet.

Remark: The back surface Multi-sections surface. As you see, the back surface becomessmoother than before. Multi-sections surface. Enter 80mm as radius; Click preview icon; Click Next icon until the solution is the inner smaller arc; Click ok to complete.

We find a portion with Zero Draft Red along the parting line. The line will be orange and the compass will be green. Right-click the red-dot of download the 2d outline drawing (mouse outline.dxf) compass and oufline Edit; Enter 10deg as Rotation Increment; Click positive rotation along W icon; Click Close Now the portion with zero-draft disappears after weve modified the curvature of the problem surface.

It will return to its original stage Now, the upper skin has been completed. Hide all elements except Join. If not, click it once Click ok to complete. Zx plane Sweep. If not, click it once Click ok to complete To create a bottom surface:- Click Sketch icon Select yz plane Draw a straight drawijg on x-axis, which is long enough to go across the whole model Click Exit icon to exit Fillet.

 
 

.Download the 2d outline drawing (mouse outline.dxf)

 
 

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA. Home current Explore. Words: 8, Pages: Then reopen again. You can see the workbench icon at the upper right-hand corner. These will be a good reference for us to build the 3D in the middle of the screen.

You can click any standard view icon to change viewing direction so that you can compare your working 3D with the reference at a specific viewpoint. We treat them as the background images only. Click ok to complete Plane. Click here Remark: A combined curve Boundary. If not, change either one. As you see, the back surface becomes smoother than before.

Although it is not a must and does not affect the final result, keeping the tree in a correct order can help us modify the model more easily in future. The line will be orange and the compass will be green. Zx plane Sweep.

If not, click it once Click ok to complete. A- 55 Version 1b- Sep06 Sweep. If not, click it once Click ok to complete Symmetry. Now, we are going to create parting surfaces, transform the skin surface into a solid, and then split it into separate components. Now a new set is created. It is underlined, and so all the coming elements will be stored under this set. Hide Extrude. We should always follow the rule that one file contains one part. Now we are going to assemble the parts into a product with other components, e.

CATpart Click Open As the parts are created from the same master model at the same origin, they are located at the right places when inserted into a product. If we make any change on it, the linked parts will be updated automatically. Catia Mouse Tutorial November Catia-cd3 Tutorial December 0. Tutorial Avion Catia November Tutorial Catia V5 November December Modelul Lui Porter August 0.

Huskystar C20 November